Are My Straps a Perfect Fit?

Digging Straps:
Most of your bra's support should come from the band, not the straps. If your straps are digging in, the band usually needs to do more of the work:

1. Loosen both straps a little.
2. Fasten your hook-and-eye one row tighter.
3. Check the band sits level, front and back.
4. Re-tighten the straps just until they lie flat without digging.

Still digging on the tightest hook? Try your sister size down in the band!

Slipping Straps:
Before anything try adjusting first!

1. Shorten both straps with the slide adjusters until they sit snug on the shoulder without digging.
2. Check the band, it should be level in the front & back (adjust hook row if necessary).

Are your straps convertible? Follow these steps to criss cross:

1. Loosen both straps first; crossing makes them tighter.
2. Before putting it on: unhook the straps at the back band of the bra, cross them into an X, re-hook, then slip it on like a tank top.
3. While wearing it: turn the back toward you, unhook both straps, move each to the opposite side and re-hook.
4. Readjust strap length for comfort.

Know your connector:

• Pin clasp (opens with a hinge): open the clasp mid-strap and reconnect to the opposite-side connector.
• Swan hook (open hook that slides): slide the hook out and into the opposite-side connector.